Publications (359)
ARTICLE
Numerical and Experimental Study of the Thermal Efficiency of an Air-Soil Heat Exchanger in the Sahelian Zone
Boureima Kaboré, Germain Wende Pouiré Ouedraogo, Adama Ouedraogo, Sié Kam, Dieudonné Joseph Bathiebo
In the Sahelian zone, air conditioning in house by air-soil heat exchangers is an alternative in the context of insufficient of electrical energy. In this work, we carried out a numerical and experimental study of thermal efficiency of an air-soil heat exchanger. This study provided an estimation of thermal efficiency of an e(...)
Sahelian zone;, air-soil heat exchanger, cooling, thermal efficiency
ARTICLE
3-D MODELLING OF ELECTRICAL PARAMETERS’ EFFECTS ON THE HEATING OF THE BASE OF AN INTENSE LIGHT ILLUMINATED POLYCRYSTALLINE SILICON PV CELL
B. Soro, M. Savadogo, B. Zouma, K. E. Tchedre, I. Sourabie, I. Zerbo, M. Zoungrana, D. J. Bathiebo
Performances of a solar cell are significantly influenced by the heating of the base. Two phenomena contribute to the heating of the base of a PV cell: the heat due to the transfer by conduction of the solar energy radiation received by the surface of the PV cell and the heat generated inside the solar cell by various phenomena related to the(...)
Intense illumination, Photocurrent, Photovoltage, Electrical Power, Fill Factor
ARTICLE
Experimental Evaluation of Thermals Performancesof The Solar Dryer with Parabolic Trough Collector
B. Magloire Pakouzou, N. Landry M'Bouana, M. S. Thierry Ky, Jean M'Boliguipa and D. Joseph Bathiébo
A cylindrical-parabolic solar-thermal converter, with 0.5m 2 of capture surface, was manufactured and attached to a furnace, constituting an indirect solar dryer. Thermal balances of the elements of the receiver, housed in the focal point of this collector, are settled. A campaign of vacuum tests of this dryer indicated temperatures of the hea(...)
Performance-thermal; solar-dryer; cylindro-parabolic; efficiency
ARTICLE
Experimental Study of Polyethylene Fusion by Scheffler Solar Concentrator
Dabilgou Dieudonné, Salifou Ouédraogo, Adélaïde Lareba Ouédraogo, Thierry Sikoudouin Maurice Ky, Bruno Korgo, Dieudonné Joseph Bathiebo, Sié Kam
Aims: The present work is the use of Scheffler technology to melt plastic waste to produce composite materials using an oven type receiver. The composite material in this study contains polyethylene as a matrix and sand as reinforcement. Study Design: The fusion temperature of polyethylene is about 200°C and is obtained by solar concentration.(...)
Scheffler Concentrator, Fusion, Solar Energy, Valorisation, Plastic waste
ARTICLE
Effect of the Orientation on the Comfort of a Building Made with Compressed Earth Block
Fati Amadou Oumarou, Adama Ouedraogo, Sikoudouin Maurice Thierry Ky, Ramchandra Bhandari, Amadou Konfe, Ramatou Konate, Rabani Adamou, Dieudonné Joseph Bathiebo, Sié Kam
Thermal comfort is one of the most important requirements that scientists
and building designers must meet to ensure the indoor air quality knowing its
importance on productivity and the health of occupants. However, it has
never been of great concern for architects and a rchitectural historians and
seldom explores it. Buildings are th(...)
Thermal Comfort, Building Optimal Orientation, Thermal Amplitude, Thermal Phase Shift, Energy Consumption, Optimal Orientation
ARTICLE
LIGHT CONCENTRATION SOLAR CELL: TEMPERATURE PROPER AND DYNAMIC EFFECTS ON ELECTRICAL PARAMETERS DETERMINED BY USING J-V AND P-V CHARACTERISTICS
MAHAMADI SAVADOGO, AMADOU KONFE, IDRISSA SOURABIE, BOUBACAR SORO, RAMATOU KONATE, MARTIAL ZOUNGRANA, ISSA ZERBO, DIEUDONNÉ JOSEPH BATHIEBO
The solar cell is assumed to be under light concentration (C=50 Suns) which leads us to take into consideration the electric field induced by electrons concentration gradient. We also take into consideration temperature influence on electron and hole diffusion parameters, on carrier generation rate, on carrier intrinsic concentration and on si(...)
Light Concentration, External Load Resistance, Dynamic Junction Velocity, Temperature Dynamic Effect, Temperature Proper Effect
ARTICLE
Comparative Study of the Thermal Comfort of Four Materials Type Used in the Construction of a Building
Daouda Sawadogo and Ousmane Coulibaly
This research work consisted in making a comparative study of the thermal comfort of four materials types used in the construction of a building. A simulation of the building with the various materials on the KoZiBu software in reference and optimized situation was carried out. A study on the sensitive and air-conditioning loads as well as the(...)
Materials, thermal comfort, modeling, air conditioning loads, sensitive loads
ARTICLE
Modeling the Impact of Desert Aerosols on the Solar Radiation of a Mini Solar Central Photovoltaic (PV)
Wend Dolean Arsène Ilboudo1*, Issaka Ouedraogo1, Windé Nongué Daniel Koumbem2, Pèlèga Florent Kieno2
This work focuses on modeling the impact of desert aerosols on a mini central solar photovoltaic (PV). Our studied physical model is comparable to a multilayer. We have described and discretized the mathematical equations which govern the physical model. Also, we analyzed the influence of the parameters τa and X on the solar radiation received(...)
Modeling, Solar Radiation, Desert Aerosol
ARTICLE
Experimental characterization of briquettes from compaction of paper and cardboard waste and study of binder’s impact during the conception
Abdoul Fayçal BAGUIAN, Salifou Koucka OUIMINGA, Ibrahim Harouna GADO, Sayon Sadio SIDIBE, Antoine BERE
Nous avons étudié la faisabilité technique de la valorisation des déchets papiers pour la fabrication des
briquettes combustibles. L’objectif de cette étude est la contribution à la valorisation matière de la filière
déchets ménagers, précisément celle des déchets papiers/cartons. Pour l’aspect technique, l’étude a été
faite sur l’impact de(...)
briquettes de combustibles, déchets papier/carton, relaxation, densité
ARTICLE
Thermal Behavior of the Natural Convection of Air Confined in a Trapezoidal Cavity
Windé Nongué Daniel Koumbem1*, Issaka Ouédraogo2, Noufou Bagaya1 and Pelega Florent Kieno1
The thermal behavior of air by natural convection in a confined trapezoidal cavity, one of the walls of which is subjected to a constant heat flow in hot climates, has been analyzed numerically. The heat and mass transfers are carried out by the classical equations of natural convection. These equations are discretized using the Finite Differe(...)
Natural convection; thermal; trapezoidal cavity
ARTICLE
Structural and physicochemical properties of dust collected on PV panels surfaces and their potential influence on these solar modules efficiency in Dakar, Senegal, West Africa
Mamadou Simina Drame, Dialo Diop, Kharouna Talla, Moussa Diallo, Balla Diop Ngom, Bado Nebon
Two dust samples were collected from the same solar panels on June, 2017 in Dakar. The first was sent to Ithemba Labs (South Africa) and the second to Lincon Nebraska University (USA) for structural and physical properties study. This work aims to evaluate the dust impact on PV efficiency. The study shows that these particles have a non-spheri(...)
West Africa, Dakar solar panel, Dust deposition, X-Ray diffraction, Diffuse reflectance
ARTICLE
Experimental Study of an Indirect Solar Dryer Using a New Collector System. Application to Mango and Ginger Drying
Thierry Sikoudouin Maurice Ky, Damus Abdoul Aziz Traore, Bienvenu Magloire Pakouzou, Boureima Dianda, Emmanuel Ouedraogo and Dieudonne Joseph Bathiebo
In this paper, an indirect solar dryer using a new type of collector is studied. The collector is built with hemispherical concentrators with an axially-centered Fresnel lens placed on top of each. That allows the collector's aperture area of 0.32m2 to fully contribute to the hot spot generated in the hemispherical concentrators. The dryer was(...)
emispherical concentrators, Solar bowl, Natural convection, Sun-tracking free indirect solar dryer
ARTICLE
MODÉLISATION ET SIMULATION D’UN BÂTIMENT CLASSIQUE VERS UN BÂTIMENT À ENERGIE POSITIVE (BEPOS)
Sawadogo Daouda , Coulibaly Ousmane, and Daho Tizane
Cette étude porte principalement sur la modélisation et la simulation d’un bâtiment à usage d’habitation et orienté vers le Bâtiment à Energie POSitive (BEPOS). C’est un bâtiment de niveau R+1 et notre étude a portée au niveau
de Rez-De-Chaussée. Le Logiciel KoZiBu nous a permis d’entreprendre une simulation du bâtiment en situation de référe(...)
charges de climatisation ; panneau photovoltaïque ; modélisation ; simulation.
ARTICLE
Modélisation et simulation d’un bâtiment classique vers un bâtiment à énergie positive (BEPOS)
Sawadogo Daouda *, Coulibaly Ousmane, and Daho Tizane
Cette étude porte principalement sur la modélisation et la simulation d’unbâtiment à usage d’habitation et orienté vers le Bâtiment à Energie POSitive(BEPOS). C’est un bâtiment de niveau R+1 et notre étude a portée au niveaude Rez-De-Chaussée. Le Logiciel KoZiBu nous a permis d’entreprendre unesimulation du bâtiment en situation de référence e(...)
Mots clés non renseignés
ARTICLE
Individual efficiencies of a polycrystalline silicon PV cell versus temperature
Adama Ouédraogo, Bernard Zouma, Emmanuel Ouédraogo, Lamoussa Guissou, Dieudonné Joseph Bathiébo
The present paper is about an investigation on the temperature dependence of efficiencies of individual energetic process (Absorption efficiency, Thermalization efficiency, Thermodynamic efficiency and Fill factor) and overall conversion efficiencies of a polycrystalline silicon solar cell which has been investigated in temperature range 10–50(...)
Polycrystalline silicon PV cell, Absorption efficiency, Thermalization efficiency, Thermodynamic efficiency, Fill factor, Conversion efficiency, Temperature